How to Clean Tile Grout in Shower

Tile grout is one of the most challenging areas to clean in a shower, and it can be especially frustrating if you’ve tried several methods that didn’t work. However, using a steam cleaner can be an effective way to remove dirt, grime, and mildew from your shower grout. In this article, we’ll go over how to clean tile grout in the shower using a steam cleaner.

Step 1: Purchase or Rent a Steam Cleaner If you don’t already have a steam cleaner, you can purchase one from a home improvement store or online. If you’re not interested in purchasing a steam cleaner, you can also rent one from some home improvement stores or rental companies. Be sure to choose a steam cleaner with a small nozzle that can fit in between the tiles and reach the grout lines.

Step 2: Prep the Shower Before you start cleaning, it’s important to prepare the shower. Remove any bottles, soap dishes, or other shower accessories to give yourself plenty of room to work. Next, turn on the shower and let the water run hot for a few minutes to create steam and loosen any dirt or grime in the grout.

Step 3: Fill the Steam Cleaner with Water Most steam cleaners have a water tank that needs to be filled before use. Be sure to follow the manufacturer’s instructions on how to fill the tank properly. Once the tank is filled, turn on the steam cleaner and let it heat up according to the instructions.

Step 4: Start Cleaning the Grout Once the steam cleaner is heated up, you can start cleaning the grout. Hold the nozzle of the steam cleaner directly over the grout and slowly move it along the grout line. Be sure to focus on one small area at a time, so you don’t miss any spots.

Step 5: Wipe Away the Dirt and Grime As you steam the grout, you’ll notice the dirt and grime start to loosen and come to the surface. Use a clean, dry cloth or a scrub brush to wipe away the dirt and grime. If you’re using a scrub brush, be sure to use one with stiff bristles to scrub away any stubborn stains.

Step 6: Repeat as Needed If the grout is heavily soiled, you may need to repeat the cleaning process several times to get it completely clean. Be patient and take your time, focusing on each small section of grout before moving on to the next one.

Step 7: Rinse the Grout After you’ve cleaned all the grout lines, it’s important to rinse away any remaining dirt or grime. Use a damp cloth or sponge to wipe down the grout with clean water. Be sure to remove all the soap and cleaner residue from the grout, as it can attract more dirt and grime in the future.

Step 8: Let the Grout Dry Once the grout is rinsed, turn off the shower and let the grout dry completely. Avoid using the shower until the grout is completely dry, as moisture can attract more dirt and grime to the area.

In conclusion

cleaning tile grout in the shower can be a challenging task, but using a steam cleaner can make it easier and more effective. By following these simple steps, you can clean your shower grout and make it look new again. Remember to be patient, take your time, and focus on each small section of grout to get the best results. With a little effort, you can have a clean and fresh-smelling shower that you can enjoy every day.